Wavetronix SmartSensor Matrix (SS-225) - User Guide Manual do Utilizador Página 19
- Página / 117
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
18 CHAPTER 1 INSTALLING THE SMARTSENSOR MATRIX
downstream of the stop bar.
2 Tilt the sensor down so it is aimed at the center of the lanes of interest.
3 If necessary, rotate the sensor so that the bottom edge of the sensor is parallel with the
roadway. is is necessary where the intersection approach has a signicant grade.
Note
To fully complete sensor alignment, you will need to connect to the Matrix sensor
using SmartSensor Manager Matrix and verify that your alignment is detecting the
vehicles in the lanes of interest (see Chapter 8).
Applying the Silicon Dielectric Compound
Use the following steps to correctly apply the silicon dielectric compound to the cable con-
nector:
1 Tear the tab o of the tube of silicon dielectric compound.
2 Squeeze about 25% of the silicon onto the pins of the receptacle side of the connector
at the base of the SmartSensor Matrix (see Figure 1.5). Be sure to wipe o any excess
compound.
Figure 1.5 – Connector Receptacle
Connecting the SmartSensor 6-conductor Cable
e next step is to plug the SmartSensor 6-conductor cable into the connector. e sensor
connector is keyed to ensure proper connection (see Figure 1.6); simply twist the plug end
of the connector clockwise until you hear it click into place. To avoid undue movement
from the wind, strap the 6-conductor cable to the pole or run it through a conduit, but leave
a small amount of slack at the top of the cable to reduce cable strain. Route the cable from
the sensor location back to the main trac cabinet.
- SmartSensor Matrix 1
- Contents 4
- Introduction 6
- SmartSensor Matrix Package 7
- Selecting a Mounting Location 8
- Sensor Pole 9
- Figure I.3 – Corner Radar 9
- Installing the 12
- In this chapter 14
- Sensor Mounting Guidelines 15
- Front edge of field of view 18
- Grounding the Sensor 20
- Cabinet Solutions 2 22
- Click 650 23
- Click 600 24
- Preassembled Backplate 25
- Wire Color Signal 28
- Channel 31
- Bus 1 Bus 2 31
- Click 112 DIP Switch Settings 32
- Click 112/114 LEDs 35
- Click 104 LEDs 37
- Channel Mapping 38
- Using SmartSensor 42
- Manager Matrix 42
- Installing SmartSensor 44
- Manager Matrix 4 44
- Using the Click 650 45
- Using the Click 600 45
- Using the Click 421 46
- Microsoft .NET Framework 48
- Communication 5 50
- Serial Connection 52
- Internet Connection 54
- Address Book 56
- Virtual Connection 57
- Virtual Sensor File 58
- Communication Error Log 59
- Figure 5.10 – Error Log 60
- Sensor Settings 6 64
- Ports Tab 65
- Figure 6.2 – Comm Tab 66
- Advanced Tab 67
- Lanes & Stop Bars 7 68
- Edit Area 69
- Saved Configuration Overlay 70
- Capturing Lanes and Stop Bars 71
- Menu Bar 72
- Saving the Configuration 73
- Moving the Sensor View 73
- Editing Thresholds 74
- Automatic Configuration 75
- Adding/Deleting/Moving a Lane 76
- Moving a Lane Node 78
- Changing the Lane Arrows 79
- Zones & Channels 8 80
- Placing Zones 82
- Editing Zones 83
- Placing AutoZones 83
- Channel Type 84
- Mapping Zones to Channels 85
- Editing Channels 86
- Output Settings 87
- Measuring Zones 88
- Figure 8.15 – Using Flags 89
- Verification 9 90
- Channel Indicators 91
- Verification Menu Bar 92
- Tools 10 94
- Backup-Restore 95
- Sensor Diagnostics 96
- Tracker Logging 96
- 96 CHAPTER 10 TOOLS 97
- Figure 10.6 – Log File 97
- Using the Rack Card Tool 98
- Firmware Version 99
- Signal Cards Switch 99
- Channel Outputs Switch 100
- Appendix 102
- Creating Custom Cables 103
- Appendix B – Cable Lengths 104
- 104 APPENDIX 105
- Figure C.1 – Click 221 105
- Mounting the Backplate 106
- Connecting AC Power 106
- 106 APPENDIX 107
- APPENDIX 107 108
- 110 APPENDIX 111
- Angle Resolution 112
- 112 APPENDIX 113
- Occlusion 114
- 114 APPENDIX 115
- APPENDIX 115 116
- 116 APPENDIX 117
Sony DSLR-A100 manuals
Owner’s manuals and user’s guides for Bridge cameras Sony DSLR-A100.
We providing 1 pdf manuals Sony DSLR-A100 for download free by document types: Datasheet
Comentários a estes Manuais