Wavetronix SmartSensor HD (101-0415) - Quick-reference Guide Manual do Utilizador descarregar pdf (Página 2)

Complete sensor alignment

1 Select Lanes from the main menu, then Conguration. Click the magnifying

glass icon at the bottom of the screen and choose Show Alignment.

2 Adjust the sensor according to the arrows and colors shown. Green means the sen-

sor is positioned for optimal performance; yellow and red mean you need to adjust.

3 Once the alignment is right, tighten the sensor mount’s strap screws all the way.

For the tool to function properly, trac must be owing freely. Also, if the sensor is

not already aligned close to perpendicular to trac, this tool will display a question

mark, indicating that the sensor is too far out of alignment for the tool to function properly.

Conﬁgure and verify lanes

Automatic Conﬁguration

Follow the steps below to automatically congure the SmartSensor HD:

1 Select Lanes from the main menu, then Conguration.

2 In the Conguration window, click the Tools icon and select Clear Edit Area.

3 Click the Tools icon again and then click Restart Auto Cfg. Click OK. When prompted to save the

conguration, choose Yes.

Manual Conﬁguration

e tools on the Conguration window (as mentioned above, select Lanes from the main menu, then Con-

guration) can help you manually set lanes and adjust lane setup.

˽ Sidebar Display – Set what the sidebars display: automatically congured lanes, lanes saved

on the sensor, distances to each lane, relative occurrence of events or a track for each detected

vehicle.

˽ Vehicle Display – Sets how vehicles are drawn and what is displayed on them. If set to dis-

play by class, the vehicles show a bin number (see Denitions in Part 6).

˽ Tools – Allows you to save and load congurations.

˽ Magnifying Glass – Lets you show or hide automatically congured lanes, lane names, lane

direction and/or a compass.

˽ Shoulder Area – Clicking in the shoulder lets you add or exclude lanes and/or the shoulder.

˽ Lane Window – Clicking on a lane lets you change information about it.

To save the settings you just changed, click the OK button.

Verify Lanes

To verify the lanes were congured properly, go to the Verication screen. Like the Conguration screen,

this screen contains the Sidebar and Vehicle Display tools, plus these additional tools:

˽ Play/Pause/Stop Buttons – Allow you to control the data display and whether passing

vehicles are being included in the counts.

˽ Lane Adjustment – Click in a lane to adjust lane volume, detection, speed, length or extension time.

˽ Logging – e options in the lower right let you log per vehicle data for verication purposes.

1 2 3 4

Sem comentários

Wavetronix SmartSensor HD (101-0415) - Quick-reference Guide Manual do Utilizador Página 2